The CSF Type Alcohol Water Plastic Inner Printing Ink is made of imported alcohol-water-miscible resin, auxiliaries and non-toxic pigments (heavy metals are not exceeded standards) without benzene and ketone solvents. It is an environmental-friendly printing ink specially designed for soft plastic packaging of food and pharmacy. It is an ideal substitute for benzene-soluble chlorinated polypropylene composite ink.
The performance characteristics:
1. This product does not contain benzene and ketone solvents, low solvent residue, heavy metal indicators meet the US FDA and EU RoHS standards, suitable for food and pharmaceutical packaging requirements;
2. Ethanol and water are used as diluents, and no harmful solvents remain;
3. Better composite strength can be obtained by compounding with two-component polyurethane glue;
4. The ink is bright in color, clear in dots, good in leveling, not easy to block, and does not hurt the scraper;
5. Good affinity with benzene-soluble chlorinated polypropylene composite ink;
The suitable substrates:
BOPP, CPP: processing degree above 38 dynes
The use and scopes:
It is mainly used for printing plastic or composite packaging of food and medicine for gravure printing machines.
The printing viscosity:
White ink: 12~15 seconds/25°C No. 3 Chaen Cup
Color ink: 15~18 seconds/25°C No. 3 Chaen Cup
| No. 1 (standard) | Absolute ethanol 100% | |
| No. 2 (fast drying) | Absolute ethanol 80% | Ethyl acetate 20% |
| No. 3 (slow dry) | Absolute ethanol 80% | Isopropanol 20% |
| No. 4 (low cost) | Absolute ethanol 20% | 95 degree ethanol 80% |
The notes:
1. Please do not mix with other manufacturers' alcohol-based inks;
2. This product is not suitable for food packaging in high temperature steaming;
3. The temperature of the drying tunnel is preferably greater than 80 °C during printing, and the air volume is opened to the maximum;
4. When mixing the diluent, please check the quality of the single solvent to prevent the ink from deteriorating;
5. Shake the ink in the bucket before use to ensure quality consistency;
6. This product should be sealed and stored for one year.
Address: No. 25, Tongming Road, Industrial Concentration Zone, Tong'an District, Xiamen, Fujian, China
Hongshen Industrial Park, Longchi Development Zone, Zhangzhou
URL：www.ohink.cn / www.emldi.com
